New Products

„DryCon“® HPPS 1700-1 Whole Body Preservation Unit without Formalin (Patented World Novelty)

Concept and Features
This world novelty in anatomical technology was designed to eliminate
the use of formalin and to create a closed system for the
processing of whole bodies for teaching purposes in anatomy.
Note: each module works autonomous and maybe programmed
individually. The modular system allows to fit the modules together to a
total plant for an unlimited number of corpuses. Depending on
the number of students the amount of units which may be installed in
different rooms, must be determined upfront. A special advantage is the processing of the whole body specimen or extremities / organs in a fully closed process chamber, whereby the infiltration solution is pumped into the chamber until the corpus / organ is fully covered (like a closed Tissue Processor in pathology). After this procedure the body maybe “mummified” for long term storage in a dry environment on a simple shelf. If this body is to be used for a student dissecting course it can be restored to it´s original “soft” condition. The DryCon unit is also designed for the regeneration, resoftening, examination and repair of ancient mummies in a cautious style. The DryCon unit (module) consists of a solid and self-carrying construction with an automatic electronic control function for one-manoperation.Especially developed for the guaranteed pollution-free fixation & conservation of whole bodies without the use of formalin in a fully closed system which is pressurized with 3 bars in order to speed up, enhance and intensify the infiltration. The DIS infiltration solution is a patented, quality controlled special solution based on the harmless, none-toxic and organic product called “Shellac” and low concentration ethanol. Due to the use of Shellac, the patented method was called “Lacservation” by mutual consent with leading anatomists.

MA-1700

„DryCon HPPS 1700-1“ with Siemens Control Unit

"SprayCon 5000" Body Preservation Unit

Concept and Features
Note: each module works autonomous and maybe programmed
individually. The modular system allows to fit the modules together
into a total plant for an unlimited number of corpses. For a volume
of 48 bodies one needs to install 16 modules, which maybe
installed in different rooms, if necessary. A special advantage is
the usage of different fixation / conservation fluids (for example
“Thiel”-solution) and different concentrations of formalin.
Solid and self-carrying construction with an automatic electronical
controll function. One-men-operation. Especially developed for the
guaranteed pollution-free fixation & conservation of whole bodies
without “dipping” the body into a solution.
The conservation of corpses with formalin or any other fixation-fluid
is done by means of a special aerosol-spray-system in a gastight
environment which is loaded with corpses on body-trays.

MA-5000-3

Bone Maceration Unit  BMU 1360-1

For enzyme- and putrefaction maceration.
Applications:
Anatomy, conservation, preparation and forensic
obduction (criminal technology)

Standard-compact design (single process chamber) for nearly
smell-free maceration incl. extraction of bad smelling fumes into
the atmosphere by means of a special filter system.

Compact design with following features:
Sturdy stainless steel frame construction complete faced
with st. st. sheets (1,0mm).
- Hermetical tight container with appr. 300 liters content
  with drain stud, fume extraction system, detachable drain
  strainer and separate lid with special Viton lip-gasket
  and 3 special quick-locks.
- Lid with spring loaded hinges for easy acces / lifting
  during opening / closing. Upper surface of lid with ductflange
  for extraction of fumes into atmosphere.
- Height adjustable feet (40mm)
- Control of functions agitation, heating temperature
  etc. by touchscreen display / computer
- Digital temperature display
- Electr. heating by means of heating medium ( water )
- Special manual valve for oxygen feeding into chamber

MA-1360

Also available:
MA1360-2 with 2 Process chambers and online pH-measurment

MA-1360-2

MA 1360-2 with Online pH-Value Display

Bone Degreasing Unit "BDU 1370"

Concept and Features
Note: each module works autonomous and maybe programmed
individually. The modular system allows to fit the modules together
into a total plant for an unlimited number of corpses. For a volume
of 48 bodies one needs to install 16 modules, which maybe
installed in different rooms, if necessary. A special advantage is
the usage of different fixation / conservation fluids (for example
“Thiel”-solution) and different concentrations of formalin.
Solid and self-carrying construction with an automatic electronical
controll function. One-men-operation. Especially developed for the
guaranteed pollution-free fixation & conservation of whole bodies
without “dipping” the body into a solution.
The conservation of corpses with formalin or any other fixation-fluid
is done by means of a special aerosol-spray-system in a gastight
environment which is loaded with corpses on body-trays.

MA-1370-50

"BDU 1370-50" with 50cm Ø degreasing vessel

"BDU 1370-70" with 70cm Ø degreasing vessel

"BDU 1370-100" with 100cm Ø degreasing vessel